RJ45 socket, also known as RJ45 connector, is generally used for the connection between network cables between broadband network devices. There are 8 grooves and 8 contacts inside the RJ45 socket. There are many details and key points in the use that cannot be ignored. For example, there are many pin interfaces in the wiring, so the wiring must not be wrong. , otherwise it will lead to failure. So do you know the common sense of RJ45 socket structure characteristics and operation points? If you don't understand, the following will give you a detailed explanation of the RJ45 socket structure characteristics and points of attention.

RJ45 socket structural characteristics

The RJ45 socket generally has a built-in spring-loaded dust cover, and the dust cover of the RJ45 socket can be automatically retracted and ejected when the jumper plug is inserted and pulled out. And the spring-loaded door ensures that the jumper plug will never be only partially inserted, affecting stable data transmission. In addition, every time the RJ45 socket is connected or disconnected, the spring support door will automatically clean the pins, thus ensuring that dust and impurities can be completely prevented from entering, so that the RJ45 socket can obtain maximum protection and high reliable and stable transmission capacity.

RJ45 socket operation precautions

Note one

Because the RJ45 socket has many pins at the end points, generally please be careful not to cross the wrong wires during wiring and do not bend or break the pins during operation, otherwise some minor details will also cause the RJ45 socket to cause failure. production.